Koala-kare 885-KIT User Manual download pdf

Tools Required:

Phillips Head Screwdriver or 1/8” Allen Wrench

1. Open Baby Changing Station. Remove the

screws that secure the old strap to the unit.

Discard old strap and screws.

2. Position the new strap on the unit with the

buckle towards the liner dispenser. (See Image).

3. For all models, take one of the Phillips Pan

Head Machine Screws. Insert it through the hole

in the chafe tab and into the hole in the front of

the bed. Secure the screw into the screw insert.

4. Repeat step 3 for the other end of the strap.

For KB200 model use the other Phillips Pan Head

Machine Screw. For KB100 and KB110 models

use the Truss Head Wood Screw.

5. Ensure that the strap is buckled. Clean up

mess and close unit.

KB100, KB110 and KB200 REPLACEMENT STRAP

INSTRUCTIONS

P/N 885-KIT

Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399

www.koalabear.com

P/N 496 January 2011

Hardware Supplied

Two 5/8” Phillips Pan Head Machine Screws One Truss Head Wood Screw

KB100 KB110 KB200

1 2 3 4

Summary of Contents

Page 1 - INSTRUCTIONS

Tools Required: Phillips Head Screwdriver or 1/8” Allen Wrench1. Open Baby Changing Station. Remove the screws that secure the old strap to the unit.D

Page 2 - KB100, KB110 y KB200

Herramientas necesarias: Destornillador de estrella o llave Allen de 1/8 de pulgada (0,3 cm)1. Abra la base del cambiador de pañales. Quitelos tornill

Page 3 - KB100, KB110 et KB200

Outils nécessaires : Tournevis cruciforme ou clé hexagonale 1/8 po (3,2 mm)1. Ouvrez la table à langer. Retirez les vis servantà xer l’ancienne sangl

Page 4 - KB100, KB110 und KB200

Erforderliche Werkzeuge: Kreuzschlitzschraubendreher oder 1/8” bzw. 3 mm Inbusschlüssel1. Babywickeltisch bis zur Horzontal-Lage aufklappen. Die zwei